Description

Brand: RATTMMOTOR

Features:

• Nema23 Stepper Motor 23HS8430B Nema23 Stepper Motor / Holding Torque: 270 oz-in ; 180N.cm / Motor Size:57x57x76mm / Phase: 2 phase / Motor Lead : 4-Lead / 1.8 Step Angle / Type:Hybrid
• Stepper Motor DriverTB6560/MD430 Stepper Motor Driver / Current: 3A / Support voltages : 12-34V DC / Step frequency up to 100khz / 2 phases bipolar driver / Full step, half step, eight step and sixteenth step
• 5 Axis V5 Breakout Board Comes with DB25 parallel cable and USB cable ; Support Mach3,KCAM4,EMC2 and other software ; 5-way input interface, you can connect limit switch and stop switch,reset,knife signal;Data transfer speed can up to 10MBit/s
• Power supply350W,24V/14.6A switching power supply; Output Voltage:24V ; Input: 110-120V AC or 220-240V AC
• ApplicationThis cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.

Part Number: 3AXISTB6560CNC

Details: Package include:
4 x TB6560 MD430single axisdriver
4 x 23HS8430B stepper motor 76mm 270oz-in dual shaft
1 x 350W 24V DC switching power supply
1 x 5 axis breakout board
1 x DB25 parallel cable
1 x USB cable
English user manual for breakout board and stepper motor driver will send by email.TB6560 MD430 Low noise of stepper motor driver
1. Introduction
MD430 is a compact single axis bipolar 3.0A/phase stepper motor microstepping driver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth–S3/S4), torque (100%, 75%, 50%, 20%–S5/S6) ,work current (0-3A–SW1/SW2/SW3) and decay mode (0%, 25%, 50% and 100%).MD430-HZ
2. Features
1) Single-chip motor driver for sinusoidal microstep control of stepping motors
2) Power on in indication led
3) 3Amps-34Volts(Supply voltages:12-34DC)
4) Full step, half step, eight step and sixteenth step(selection with dipswitches)
5) Torque (100%, 75%,50%, 20%)
6) Work Current (0-3A selection with SW1/SW2/SW3)

5 axis CNC Breakout board interface adapter board
full support for MACH3, KCAM4, EMC2, the PC software to support parallel port control;
Stepper Motor
General Specification:
Step angle accuracy:+ – 5%(full step,not load)
Resistance accuracy: + – 10%
Inductance accuracy:+ -20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature ———-20deg —- +50deg
Insulation resistance:100ohm Min,500VDC
Insultion Strength——–500VAC for one minute
Datasheet(23HS8430B,front shaft is 8mm diameter shaft,21mm lenth,back shaft is 6.35mm dia and 10mm length,270oz-in or 18kg.cm holding torque)
Switching power supply
350W 24V/10 A,single output switching power supply

EAN: 0785004502261

Package Dimensions: 10.3 x 10.2 x 6.3 inches