Description

Brand: CNCTOPBAOS

Features:

• ModelUpgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board with Offline controller; Input voltage: 24VDC;Applications The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines.
• New functionsAdd 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch.
• Support softwareGRBL Contol/Candle(3 axis)/Universal Gcode Sender; Support System: Windows XP/7/8/10
• Support MotorSupport XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23);Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module
• Offline ControllerIt supports SD card and TF card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient)

Part Number: 4V

Details: Package include:
1x 3 Axis GRBL control board V3.4

1x GRBL offline controller
1xUSB cable

Specification:
Connection: USB (USB-CH340)
Support Software: GRBL controller, UniversalGcodeSender
Input voltage: 12-24V
Master chip: atmel 328P (arduino nano)
Spindle drive chip: MOSFET
Spindle PWM speed: Support
Support stepper motor: 12V, maximum current of 2A. (Any stepper motor 42, 57)
Power Interface: 5.5-2.5mm DC interface

Advantage
1.add the outer casing
2.add the power button switch
3.Use integrated imported stepper motor drive
4.Add the fan port to force heat dissipation;
5.add offline recognition
6.Improved USB interface

GRBL offline controllerfunction:
1. Manually control: manuallyadjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan
2. File engraving: after off-line controllersave file, it can connect the GRBL control board and process engraving, no need to connect PC computer
3. Save file:after the off-line controller connect PC, it will be recognized as USB, large capacity storage device, can access engraving file directly.
SD shows it is SD card condition, turn on power supply after insert SD card, otherwise, it won’t work.SD card capacity 4G could be recognized.
PressX- orX+ button to switch
ControlPress confirmation button to access manually controllingpage
FilePress confirmation button to access file page
SetPress confirmation button to access settingpage
On the off-line controller, buttons control correspondingactions.
SPN is spindle controlling,should press SPIN.
Fan is fan controlling, should press SMOD.

EAN: 0681385630916

Package Dimensions: 5.9 x 4.6 x 3.4 inches