Description

Brand: ANYCUBIC

Color: Grey

Features:

• Anycubic Water Washable Resin contains hydrophilic groups with good water solubility, which is can be directly cleaned with water instead of alcohol and greatly save the cost of alcohol use. Besides, it can also be cleaned by Anycubic Wash and Cure Machine or ultrasonic cleaning.
• Anycubic UV resin prints the models with low shrinkage during the photo curing process, which ensures the high precision and smooth surface. The low shrinkage rate ensures that every model is printed in good details.
• Anycubic water washable photopolymer resin has low odor and it can ensure customers with a better printing experience. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.
• Low resin viscosity means good fluidity in the printing process, which greatly improves the printing success rate. Anycubic upgraded water washable resin has a longer shelf life to 1 and a half years to help the resin to store longer and safe use.
• Compatible with 365-405nm wide band, Anycubic resin is suitable for all 3D LCD/DLP printers on the market, better effect with ANYCUBIC LCD 3D printers.

Details: ANYCUBIC Water Washable 3D Printer Resin

Instructions for use

1. Before use:
Shake the liquid resin before use; Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission

2. When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements; Select the correct print parameters and settings for printing

3. After use:
After printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol (95%), lactate or isopropyl alcohol cleaning solution;

4. Post-processing steps:
(1)Remove the printed model from the molding platform with a blade;
(2)Submergethe modelin the cleaning solution, rinsed or ultrasonically washed, then taken out and drained; ANYCUBIC Wash and Cure machines are suggested to ensure better effect;
(3)Proper processing, such asremoving support, polishing, coloring, etc.

Precautions:

1.Keep sealed and away from light at room temperature. Avoid heat or sunlight.

2.Recommended temp: 18-35. The printing effect may be affected if the temperature is too low. The resin can be preheated properly (not more than 60) before use.

3.In order to ensure the desired properties of cured materials, the intensity and time of light source during post-curing should be controlled.Therefore, it is suggested that:

(1)The intensity of mercury lamp or LED light source is 5-10MW /m2, and the duration shall not exceed 1 hour (self-regulation);

(2)The duration of sun exposure (summer) should be controlled at about 1 hour;

(3)Close or long-term exposure under strong light sources such as high-power high-pressure mercury lamp is prohibited;

(4)It is recommended to print in a dark room, or cover when printing.

Part Number: SSXGY-10AU0418

model number: SSXGY-101A